Plug the Receiver into USB port. The LED indicator will then start
2. Push either the Next Slide button for 2 seconds. Then release
the button. When you do, the LED indicator should turn off. That
means it has synched up with your remote control's unique signal.
3. Begin PowerPoint (or other presentation software). Open your
presentation file and select View Show or View Show with Effects.
4. Then use your
PowerPointer Chrome remote to control your presentation using the
Next Slide (aka Page Down) button, Previous Slide (aka Page Up)
button, and/or Laser function button (as shown in the illustration
My remote doesnt work. I press the buttons but they dont
do anything. What can I do?
Tip 1: There is no On/Off button. So if none of the buttons on your
remote work, including the laser button, then the problem is probably
a dead battery. Solution: Unscrew the ridged part of the remote
and replace the two 1.5 volt batteries in the remote.
Tip 2: If the laser pointer buttons works, but the Slide Control
buttons dont, try moving the receiver to a different USB port
and then follow the receiver setup instructions above, once again.
Since laser light can be harmful to eyes, do not look directly into
the laser beam or aim it into the eyes of others. Doing so could
cause blindness and could lead to criminal charges against you.
2. The device is not a toy. You must keep it out of the reach of